home pagetablesconstructionaccessorieswarrantydnk191@aol.com


Competition Grade - Billiard Congress of America (BCA) Approved for Tournament Use

 


For an exact fit, aprons are attached at the factory using a grid framework where two cross beams 1 1/2" thick run the width of the table. This method of construction ensures maximum table stability. The Uniframe Support System was engineered with strength and longevity. Most of our tables are constructed with solid hardwood cabinets that are reverse-grained and laminated to resist the natural tendency of wood to warp or twist. In addition, to promote a flawless installation, cabinets are assembled, pre-leveled and squared at the factory.
   

All of our tables have genuine mother-of-pearl inlayed diamond sights along the rails.
 
   

Sporting great legs, the corner system is the foundation on which everything else depends. Our tables, consistent with the highest quality craftsmanship, incorporate over-sized, mortised (recessed) legs that connect to stop block timbers. There is no better support system.
   

Just below the surface of every table lies the highest quality, purest, diamond-honed slate available anywhere on earth. The three-piece, oversized one-inch (1") slate is matched and diamond-honed to a flatness that even exceeds the Billiard Congress of America's (BCA) requirements — creating a smooth, even, and consistent playing surface on every table. The slate rests on a three-quarter inch slated-liner made of hardwood that is precision-cut, milled, and laminated. This provides a quieter game, tighter cloth installation, and a truer playing surface
   

Solid hardwood wide-profile top rails provide an elegant appearance. And, for an exact fit, aprons are attached at our factory. The floating nut plate secures the rail and apron to the slate bed with unyielding torque strength allowing for exact alignment.

The cushions are made from 100% natural gum rubber with no fillers or stabilizers. They are molded to a K-66 profile with control-fabric backing. This backing ensures that the rubber permanently adheres to the wood and that the felt does not loosen or move, allowing for maximum speed on each shot. Solid hardwood sub-rails are designed to deliver optimal ball response. They are reverse grained and laminated to add weight and density, thus resisting the balls impact and allowing for the cushion to absorb and react to the energy transference. In addition, the cloth relief lets the rail system securely lay flush to the slate for added symmetry as well as strength.